Skip to content
FWFORMAWorks / Bandung Lab state / illustrative demo

FORMA Works / Proof Lab 030

Proof before
the pitch.

Bandingkan proses, material, tolerance, dan window produksi dengan catatan yang cukup untuk memulai RFQ yang masuk akal.

Configure an RFQ ↘Read the proof ↘

01 / Capability matrix

Make the constraint
visible early.

Procurement does not need a louder promise. It needs a calmer comparison between process, material range, tolerance, finish, and the window each choice can protect.

ProcessCNC millingSheet metalPrecision turning
Material rangeAluminium / steel / acetalAluminium / stainless / steelStainless / brass / acetal
Tolerance band±0.05 mm*±0.15 mm*±0.03 mm*
FinishingBlast / anodisePowder coat / passivatePolish / knurl
Best windowPrototype → pilotPilot → productionPrototype → production
Selected process noteBest when the part needs a dependable datum, visible edge quality, and a revision loop before production.
Material range / Aluminium, steel, acetalTolerance / ±0.05 mm illustrativeLead window / 3—5 weeks
FORMA
MATERIAL STUDY / AL / 6061-T6

02 / Material selector

Material changes
the answer.

Light, machinable, and a clear choice for housings that need a controlled finish without excess mass.

Finish
Bead blast / clear anodise
Process fit
CNC milling · sheet metal

03 / QA trace

A part is more
than its surface.

Follow an illustrative trace from incoming material to release. The shape is simple on purpose: useful enough for a first conversation, honest enough to be replaced with real records.

IN
Step 01

Incoming material

Heat / lot / certificate reference captured as illustrative demo fields.

logged
OP
Step 02

Process record

Setup, tool path, bend sequence, or turning program attached to the work order.

checked
QC
Step 03

Inspection record

Critical dimensions and finish points sampled against the drawing revision.

checked
RL
Step 04

Release

Review note and pack-out instruction prepared for the next team.

ready
Licensed workshop detail study showing a dark mechanical assemblyExisting licensed workshop study / captioned material detail

04 / Production case

A quieter enclosure
for a noisy room.

Constraint

The first enclosure trapped heat, showed too many fasteners, and needed a smaller revision loop before a pilot run.

Process choice

CNC-milled aluminium shell + bead-blasted face + a measured sheet-metal bracket.

Measured output18 revised housings · 2 drawing revisions · 1 inspection pack
Verification

Critical bore held within the illustrative ±0.05 mm band across the sample set.

05 / Capacity bands

Plan the window,
not a promise.

These are planning bands for a demo interface, not live inventory. Volume changes the explanation because process risk and inspection cadence change with it.

01
1—5 pcs

Prototype

3—5 weeks

One or two revision loops, first article inspection, and a clear handoff package.

02
6—50 pcs

Pilot

5—8 weeks

Process tuning, fixture check, and a repeatability sample before the larger run.

03
51—500 pcs

Production

8—12 weeks

Capacity planning, inspection cadence, packaging route, and a controlled release plan.

06 / RFQ configurator

Give the shop
the useful first line.

Pilih proses, material, volume, target date, dan kesiapan file. Konfigurasi ini memengaruhi catatan capability, lead-time, dan pesan RFQ.

ProcessCNC milling
MaterialAluminium 6061
VolumePrototype · 1—5 pcs
Lead-time note

3—5 weeks / One or two revision loops, first article inspection, and a clear handoff package.

FORMA / REV A
FW
030

Title block / end of proof

See the
next revision.

Configure RFQ ↗